ÐdzÇweb

Direct Acting Valve Installation

Ìý

Ìý

Stacking Valve Series Assembly

Electrical Connections

1. Remove the Philip screw from the plastic housing and unplug it from the DIN coil.

2. From the screw opening, use the screw to push the terminal block out of the plastic housing.

3. Note the 1, 2 and ground markings on underside of DIN enclosure.

4. For DC DIN Coil, Connect 1 to Positive, 2 to Negative.

5. For AC DIN Coil, connect 1 to HOT wire, 2 to Neutral wire, and if required connect ground to ground wire.

1. For DC Coil, connect the RED wire to Positive, and the BLACK wire to Negative.

2. For AC Coil, connect the BLACK wire to HOT wire, and the WHITE wire to neutral wire.